DJ2000制冷型電解雙噴減薄儀，是利用光電技術和半導體致冷技術研發出的新一代透射電鏡樣品制備產品。此產品實現技術上的兩大突破，使用本產品進行電鏡樣品制備，具備以下優點：
1。 半導體致冷：
替代液氮，不但使實驗更加方便，而且避免了使用液氮的危險性。
2。自動控制穿孔：
利用軟件設定不同的參數指標，自動控制穿孔過程。不但避免了的眼睛觀察的疲勞感和不確定性，同時還大大提高了穿孔的靈敏度，使樣品產生超微細孔，有利于薄區的產生。
Introduction
The DJ2000 refrigerated electrolytic polisher, a new generation product for transmissionelectron microscope (TEM) sample preparation combined with electro-optics and semi-conductor refrigeration technique. Two technical breakthroughs have been realized in this product. First one, the traditional liquid nitrogen cooling technique was replaced by semiconductor refrigeration technique to make the low temperature environment; the other one is that software was used to guarantee more accurate judgment when perforation occurred on the sample.
Compare to those traditional products, this new generation product has the following advantages:
1. The traditional liquid nitrogen cooling technique was replaced by semiconductor refrigeration technique. It could not only assure the more convenience operation, but also remove the hazard for using liquid nitrogen.
2. The software could automatically control and stop the perforation process. Therefore, no human eyes are needed any more. The judgment accuracy of perforation will be remarkably improved and the precise judgment for super small holes on samples could be realized.
性能指標
額定電壓
|
220V，單相
|
額定頻率
|
50Hz
|
額定功率
|
600W
|
制冷功率
|
280W
|
致冷水流量
|
5L/Min
|
制冷溫度
|
- 30℃
|
電解電流
|
0 - 120mA
|
電解電壓
|
0 - 80V
|
電解液注入量
|
<200mL
|
電解槽尺寸
|
200mmX170mmX190mm
|
電源箱尺寸
|
340mmX240mmX180mm
|
電解槽重量
|
8kg
|
電源箱重量
|
8kg
|
Specification:
Power Voltage
|
220V，Single phase
|
Power Sequence
|
50Hz
|
Power Capacity
|
600W
|
Cooling Capacity
|
280W
|
Flow rate of Cooling water
|
5L/Min
|
Electrolyte temperature
|
- 30℃
|
Electrolysis current
|
0 - 120mA
|
Electrolysis Voltage
|
0 - 80V
|
Quantity of Electrolyte
|
<200mL
|
Electrolyzer Size
|
200mmX170mmX190mm
|
Controller Size
|
340mmX240mmX180mm
|
Electrolyzer Weight
|
8kg
|
Controller Weight
|
8kg
|
