Jupiter-BBB高鎳鑄鐵焊條

Shield Metal Arc Welding(SMAW - Stick)

For all cast irons - meehanite, ductile, mealleable, gray cast irons, and steel to cast iron with excellent machinability.

適用于所有鑄鐵：Meehanite孕育鑄鐵、球墨鑄鐵、可鍛鑄鐵、灰口鑄鐵，以及鋼和鑄鐵的焊接，焊縫可加工性佳。

Features

亮點

Strength Up To 65,000 psi/448MPa

抗拉強度高達65,000 psi/448MPa

Non-Conductive Coating Eliminates Side Arcing

非導電涂層可消除偏弧

All positions

全位置焊接

Use In Tight Spots

可在狹窄部位使用

Good Arc Visibility

良好的電弧可見性

Great Weld Appearance

出色的焊縫外觀

Soft Stable Arc

軟穩定弧

Weld over Dirt and Oil

可在油污上直接進行焊接

Porosity Free

無氣孔

Easiest cast iron rod to use

極易使用

Excellent Machinability 卓越的可加工性

Coating Will Not Overheat Even On AC 涂層即使在交流電下也不會過熱

Characteristics

特點

Jupiter-BBB has a special non-conductive coating, which permits welding in tight spaces without side arcing. It produces fully machinable deposits and allows simple repair of defective, broken or worn castings, even in deep holes or out-of-position.

Jupiter-BBB has a soft stable arc and low-fuming characteristics that let the welder see and control the arc puddle.

Since Jupiter-BBB can generally be used without preheat, cast parts can often be repaired in place without disassembly.

Jupiter-BBB配有特殊的非導電涂層，可以在狹小的空間內進行焊接，而不會產生偏弧。它產生完全可加工的熔敷層，可以簡單的對有缺陷、斷裂或磨損的鑄件進行修復，即使是在深孔或尷尬位置的情況下。

Jupiter-BBB具有柔軟穩定的電弧和低煙霧特性，讓焊工易于看到和控制電弧熔池。

由于Jupiter-BBB通常可以在沒有預熱的情況下使用，因此鑄件通�？梢栽诓徊鹦兜那闆r下進行現場修復。

Technical技術規格

Size and Amps AC/DC+(DCEP)

Best Practices Application 應用

Use medium arc and stringer beads.

使用中等電弧和線狀焊道。

Skip weld to prevent overheating.

跳焊以防止過熱。

Light peening recommended.

建議輕敲擊。

Preheat critical or heavy parts to 500?F(260?C).

將關鍵或重型零件預熱至500?F（260?C） 。

Cool slowly after welding.

焊后緩冷。